Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Range: 0.00 to 14.00 pH*, -5.0 to 105.0 °C (23.0 to 221.0 °F)
Resolution: 0.01 pH; 0.1 °C (0.1 ºF)
Accuracy @ 25 °C / 77 °F: ±0.10 pH; ±0.5 ºC (±0.9 ºF)
Calibration: User calibration: automatic, one or two-point with buffer solution (4.01, 7.01, 10.01 pH)
Process calibration: single point, adjustable (±0.50 pH around measured pH)
Temperature Compensation: Automatic
High or Low Mode Operation Pump Control:
- On/Off control using adjustable set point (4.00 - 10.00 pH) with adjustable hysteresis (0.10 to 1.00 pH)
- Proportional control using adjustable set point (4.00 - 10.00 pH) with adjustable proportional band (0.10 to 2.00 pH)
- Startup delay timer at power-on (0 to 600 sec.)
- Pump flow control 0.5 to 3.5 Litre/hour (0.13 to 0.92 Gallon/hour) and maximum output pressure 1 atm (14 psi)
- Manual control for pump priming (defined in setup)
pH Alarms:
- High & Low with enable or disable option
- Triggered after 5 sec. if the controller records a set of consecutive readings over or under threshold values
- Level with enable or disable option
- Overtime protection (1 to 180 min. or Off)
Controller Alarm System:
- Intuitive alarm system, using red, yellow and green colour coded backlight
- User-selectable, alarm setup options
Alarm Relay Output:
- SPDT 2.5A / 230 Vac
- Activated by pH-selectable alarm conditions
Probe Input:
- Quick connect DIN connector
- Galvanic isolation
Digital Input:
- External switches can be attached to hold the control due to external events (low reagent level, recirculation pump doesn’t work)
- Galvanic isolation
Power Supply: 100 - 240 Vac, 50/60 Hz
Power Consumption: 15 VA
Environment: 0-50 ºC (32-122 ºF), max. 95% RH non-condensing
Dimensions: 90 x 142 x 80 mm (3.5 x 5.6 x 1.8”)
Weight: 908 g (36 oz)
Casing: Wall mounted, built-in pump, IP65 rated
HI-10063 pH & temperature probe
Range: 0 to 12 pH
Reference: Double junction
Junction: ClothTemperature sensor: Yes
Temperature range -5 to 70˚C (23 to 158 °F)
AmpHel® : Yes
Matching pin: Yes
Body: PVDF (white)
Top thread: 3/4” NPT
In-line mounting thread: 1/2” NPT
Cable length: 2 m
Connector: Quick connect DIN connector
Maximum pressure @25 °C: 3 bar (43.5 psi)
Ordering information: HI-981412-00
- Supplied with HI-981412 controller
- HI-10063 pH/temperature probe
- 4.01 pH buffer solution, 20 mL (3)
- 7.01 pH buffer solution, 20 mL (3)
- Power connection cable
- Instruction manual and quality certificates for instrument and probe.
