Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Function: AC/DC current measurement, peak current hold, online monitoring
Power: 6V DC(LR6 1.5V*4 alkaline dry batteries, continuously working for 12 hours)
Test mode: Clamp CT, non-contact measurement
Clamp size: 108mm*148mm (clamp electric cable of diameter 80mm, or 160mm*4mm flat cable and steel earth wires)
Measurement range: AC: 0.0A~1000A; DC: 0.0A~2000A
Resolution: 0.1A AC/DC
Measurement Accuracy :
- 0.0A-999A: ±2%±5dgt
- 1000A-1499A: ±3%±5dgt
- 1500A-2000A: ±4%±5dgt
Standard condition: 23℃±3℃, ≤75%RH, measured wire is at the center of the clamp.
Frequency response: AC: 45Hz～400Hz
Sampling rate: About 2 times/second
Measured wire position: Measured wire at approximately the geometric center of the clamp, max. Off-center error is 2%rdg.
Display mode: 4-bit LCD display, display area 47*28.5mm
Polarity indication: Automatic recognition under DC current detection, displayed with “-”.
Range shift: Automatic switching.
Line voltage: Below AC 600V line measurement
Software: Stored data can be uploaded to PC via software.
USB interface: With USB interface, wire 1.5m.
Data storage: Can store 99 groups of data, “FULL” indicates full storage.
Peak hold: Peak capture and peak hold function, press “HOLD” for long to show the peak value.
Data hold: “HOLD” symbol appears.
Overflow: “OL” symbol appears.
Automatic shutdown: Automatically shutdown about 5 minutes after power on to reduce battery consumption
Battery voltage: Low battery symbol appears to remind the replacement of battery when battery voltage drops below 4.6V.
Meter size & weight: 350*180*55mm(L*W*H); Meter: 1.5kg(with battery), package: 2.6kg(with accessories)
Working current: 20mA
Environment: Working: -10℃~40℃, ≤80%RH; storage: -10℃~60℃, ≤70%RH
Insulation strength: AC 3700kV/rms (Between the rear cover screw and the housing)
Safety compliance: IEC1010-1, IEC1010-2-032, class 2 of pollution, CAT III (600V)
