Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

Power quality standards
Power Quality Measurement Standards: IEC 61000-4-30:2015 Class A; IEC 61000-4-7:2009; IEC 61000-4-15:2010
Power Quality Product Standards: IEC 62586-1:2017; IEC 62586-12:2017
Power quality measurements
Waveform sampling: 1024 points/cycle
Harmonic wave: Total harmonic distortion;2~63rd harmonic amplitude, phase angle, distortion rate;Voltage crest factor, current K coefficient
Harmonics: Total inter-harmonic distortion;: 0~63 harmonic amplitude and distortion rate
Voltage deviation: The voltage deviation of each phase is up and down
Frequency deviation: Frequency deviation and downward deviation
Imbalance vs. ordinal components: Voltage and current imbalance; : Voltage and current positive/negative/zero-sequence components
Voltage fluctuations: Short-term flicker, long-term flicker
Grid signal voltage: 2 groups of 8 voltage signal detection
Analysis and recording
Voltage sags event logging:
Voltage sag event logging:
Voltage interruption event logging:
Fast voltage fluctuation capture event logging: Provides long-term flicker recording and short-term flicker recording
Inrush current event logging:
Signal voltage event logging:
ITIC/SEMI curves: It is displayed through the web page and display interface
Correctly assess the degree of hazard of transient power quality events and the tolerance of power equipment to voltage disturbances
Metering
Full-wave power: Forward/reverse/net/total/four-quadrant phases and total active energy, reactive energy, apparent energy; Supports both fundamental and full-wave power
Fundamental electrical energy:
Demand
Real-time demand: The current demand of each phase, the forward/reverse phases, the total active power demand, the reactive power demand, and the apparent power
Demand
Event logging
Monitor events: 1024 bars with 1ms resolution
Device logs: 1024 bars with 1ms resolution
Data Logging
Valid value records: Semi-weekly data such as voltage, current, and power are recorded
Waveform recording: 128 records; Three-phase voltage and current waveform data are recorded
DI/DO
Switching Inputs (DI): 8-channel DI (optional)
Switching Output (DO): Optional 8DO + 1Alarm
Communication
RS485 port: 2 pcs
RJ45 Ethernet port: 2, 100M/1000M
Communication Protocol: Modbus RTU, Modbus TCP, TCP/IP, HTTP, SNTP, IEC61850
Display: 7-inch TFT color screen, (resolution: 800x1280); Measurements, energy values, vector plots, waveform plots, ITIC/SEMI curves, harmonic histograms, power quality event recordings, and more
Time Sync: NTP, Modbus, GPS differential, IRIG-BIEEE 1588
Dimensions: 264*250*175mm




