Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Detector Type:
Plasma Emission Detector design based on a Duty Cycle Controlled System.
Integrated oscillating sub ppb system.
Sample gas: Helium
Output: A ( Alarm option)
Serial Communication: Serial Interface - Profibus
Range: 0 – 50 ppb/0-500 ppb/0-1000 ppb
Repeatability & Accuracy: < +/- 1% (refer to design report)
Response Time: < 1 minute
Standard Features:
Manual or auto-ranging (user selectable)
Microprocessor controlled
Touchscreen 7 inches HDMI TFT display
Self diagnosis system with auto-resolve alarm
Alarm historic:
Safe calibration procedure to avoid any bad calibration
Digital outputs for remote monitoring: (all dry relay contacts)
System status (1 output)
Range in use (3 output)
Calibration in use (1 output)
Gas Connections:
Sample: 1/8” face seal fittings
Vent: 1/8” compression fitting
Calibration Gas:
Zero: Integrated in the unit with LDP1000
Span: 1000 ppb N₂
Sample Flow Requirements: 150 sccm at 15psig to 500 sccm at 30 psig
Sample Gas Operating Pressure: 10-30 psig
Operating Temperature: 10 °C to 45 °C (must be stable)
Supply: 220 V
Power Consumption: Maximum 110 watts
Drift/Stability: < +/- 0.01% (refer to design report)
Weight: 37 lbs (17 kg)
Enclosure Type: 3U rackmount
Ingress Protection: IP20 in accordance with IEC 60529
Enclosure Finish: RAL7030 powder coat
Certification
In compliance with EMC directives: IEC 61000-4-3: 2020, IEC 61000-4-6: 2013, IEC 61000-4-2: 2008, IEC 61000-4-4: 2012, IEC 61000-4-5: 2014 A1: 2017, IEC 61000-4-8: 2009, IEC 61000-4-11: 2020 for immunity & CISPR 32: 2015 A1: 2019, FCC Part 15, Subpart B: 2021, CISPR 32: 2015 A1: 2019, FCC Part 15, Subpart B: 2021 for emissions.
