Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
BASIC OPERATION
The MADE fuse tester performs a measurement of the fuse resistance.
This measurement is based on the 4 wire measurement method with automatic compensation of the temperature effect on the result.
The fuse tester consists of a rigid case, including :
- An operating panel
- Two measuring clamps
- A self-test system
- A temperature sensor
The fuse test is performed in 4 steps :
- Power on (with automatic self-test)
- Connection of the 2 measuring clamps to the fuse
- Selection of the fuse type from a selection menu
- Measurement of the fuse resistance and immediate display of the result
The type of fuse to be tested is selected from the on-board data base holding the following parameters :
- Voltage
- Amperage
- Trade Mark
- Identifier
The database is generated using a management PC software which can be updated by the user and transferred to the tester via an USB connection.
Ranges: 2,5Ω~5mΩ
Accuracy: 0.1 mΩ
Tolerance: 12,5 % (i. e. detection of 1 cut wire out of 8)
Maximum number of fuses in memory (database): Up to 3000
Test current: 200 mA
Weight: 2,6 kg
Dimensions: 304 x 270 x 144 mm
Operating temperature: -20°C to +55°C
Power supply: 2x9 V battery 6LR61 type (alcaline or lithium)
Maximum number of measurements without changing the batteries: 2200 measurements
Standard: IEC-1010-1, CAT I 3V
Sealing: IP66 closed, IP52 open
Mechanical protection: IK07 closed, IKI03 open
