Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Basic Measurement Readiness:
+ LCRZ: 0.05%;
+ DCR: 0.10%
+ Calibration Conditions: Preheat time≥ 30 min; Environment temperature : 23±5°C; Signal voltage: 1V; Vrms Cleared: after OPEN, SHORT Measuring cable length: 0m
Test Signal Frequency: 50Hz-100kHz, 0.01Hz step 34points
Signal Impedance Source Output: 30Ω,100Ω optional,±1%@1kHz
AC Test Signal Level:
+ Normal: 10mV-2Vrms; Min. resolution: 10mV, accuracy: 10% x set voltage + 2mV 100μA-20mArms minimum resolution:0.1mA
+ Constant Level: -
DCR Test Signal Level: 1V DC
DC Bias Voltage Source: -
LCR Meter Test Parameters: L,C,R,|Z|,D,Q,|Y|,G,X, θd, θr, RDC, Vm, Im, ∆%
DCR Display Range: 0.00001Ω~999.999MΩ
LCR Parameter Display Range:
|Z|, R, X: 0.00001Ω~99.9999MΩ
|Y|, G, B: 0.00001µS-99.9999S
C: 0.00001pF-9.9999F
L: 0.00001µH-99.9999H
∆%: -999.999%~999.999%
D: 0.00001-9.99999
Q: 0.00001-99999.9
θ(DEG): -179.999º-179.999º
θ(RAD): -3.14159-3.14159
Display Number of Digits: 6
Equivalent Circuit: Series connection, parallel connection
Range Mode: Auto, keep
Trigger Mode: Internal, manual, external, bus
