Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Motion System
Type: Closed-loop servo motors
configurations: standard products
X-Travel: 517.5 mm
Y-Travel: 537.5 mm
Z-Travel: 100 mm maximum
X-Y Velocity: 1.0 m/s (39.4 in./s) (max)
X-Y Acceleration: 1 g peak (10 m/s2) (max)
Z-Axis Velocity: 0.5 m/s (max)
X-Y Repeatability: 45 µm @ 3 sigma at standard payload (4.5 kg)
Z-Axis Repeatability: ±100 µm, minimum Cmk of 1.67 at standard payload (4.5 kg)
X-Y Resolution: 2.5 µm
Z-Axis Resolution: 2.5 µm
Positional Accuracy: ±100 µm, minimum Cmk of 1.67 at standard payload (4.5 kg)
Conveyor
Inline: Single-lane standard chain conveyor
Motor-Driven Width Adjustment: 35 to 485 mm (1.4 to 19.1 in.)
Maximum Clearance: 100 mm (4 in.) above and below PCB
Maximum Pallet/PCB Weight: 5 kg (11 lbs.)
Computer: Industrial PC with monitor, keyboard, and trackball
Software EasyCoat® 6: Windows® 10 operating system
Fluid Delivery Methods:
Precise Non-Atomized Conformal Coating: Select Coat® SC-280 Film Coater (circulating and non-circulating)
Versatile, Atomized Spray Coating:
Select Coat® SC-300 Multi-Mode applicator
Select Coat® SC-350 Select Spray applicator
Highly Selective, Precision Jet Coating:
SC-400 PreciseCoat® conformal coating jet
SC-450 PreciseCoat® conformal coating jet
Versatile Valves: DV-01, DV-05, DV-09 valves
Facilities Requirements:
System Footprint:
1000 mm width x 1330 mm depth (39.3 x 52.4 in.)
Computer keyboard/monitor occupy additional 605 (23.8 in.) in the front
Lower front door requires 855 mm (33.7 in.) clearance to open.
1000 mm clearance in the rear recommended
Air Supply: 620 kPa (90 psi. 6.2 Bar), up to 0.34 m3/min (12 SCFM); ¼-in. male NPT
connection type
Ventilation Rate, minimum: 0.094 m3/s (200 SCFM @ 1.0 in. water column)
Duct: 152.4 mm (6.0 in.)
Optional Nitrogen Source: 410 kPa (60 psi, 4.1 Bar) @ 0.014 m3/min (0.84 m3/hr 0.5 SCFM); for moisture sensitive materials
Main Power: 100-240 VAC, 10 A (max), 50/60 Hz
Note: System can run on 120 VAC without heater option installed.
Noise: Peak ≤ 74.0 dBA; Average ≤ 73 dBA (with two applicators)
System Weight: 500 kg (1102 lb) max
Standards Compliance: SMEMA, CE, NFPA 79, SEMI, EN ISO 13849-1 Category 3
