Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
PULSER
Initial pulse filling frequency
(Selection of a frequency filling is determined by the testing task. Available 2 channels with different
0.5, 1, 2, 3, 4, 5, 6, 8 MHz;(up to 8 MHz available as an extra option)
Type of initial pulse: Toneburst Waveform;
Number of periods: 2-6;
Pulser amplitude: up to 2000 Vpp;
Pulse energy: depends on a filling frequency;
Pulse repetition frequency (PRF): from 50 to 4000 Hz;
RECEIVER
Gain adjustment: -20 to 68 dB (gain step 0.1, 0.5, 1, 2 dB);
Filter: 0.5, 1, 2, 3, 4, 5, 6 MHz;
Delay: from 0 to 1000 mm in steel (sound velocity 3230 m/s);
Range: from 1 tо 6000 mm in steel (sound velocity 3230 m/s);
Number of averages: 2 / 4 / 8 / 16 / 32;
Data presentation: А- Scan; B-Scan; C-Scan;
TCG
Depth: entire gain range;
Number of points: not less than 20;
Minimum time step between TCG points: up to 1 µs;
Maximum slope: not less than 46 dB/µs;
GATES
Two independent gates per channel Amplitude and time measurements
Two acceptance levels per gate
A/D converter: 10 bit, 80 MHz;
PORTS
(for communication with PC and various peripheral devices)
Ethernet (for communication with PC);
CONNECTORS
2 lemo00 connectors for connecting the EMAT to the receiver of EMA channel;
2 BNC connectors (one connector for the first
1
1 power connector;
1 Ethernet connector for transmitting the data to PC;
1 Trigger connector is used either for synchronization between EMA
