Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Accuracy: ± 0.4 °C
Polarity: Unipolar
Frequency: 50 to 60 Hz
Input Type: RTD
Resolution: 1°/0.1°; 10 µV process
Form factor: 1/8 DIN
Display Size: 10.2 mm (0.40 in)
Display Type: 4 Digit, 9 Segment LED
Reading Rate: 3 samples/sec
Accuracy Note: RTD (Pt, 0.00385, 100, 500, 1000 Ω) : 0.4°C, RTD (Pt, 0.00392, 100, 500, 1000 Ω) : 0.4°C
Display Color: Red, Green, Amber
Output Detail: Optional Alarm 1 and 2 (Programmable) Type: Form “C” SPDT relays Operation: High/low, above/below, (limited output to 30 Vrms only) band, latch/unlatch, normally open/normally closed and process/deviation; front panel configurations Optional Analog Output (Programmable): Non-isolated, retransmission 0 to 10 Vdc or 0 to 20 mA, 500 Ω max (output 1 only). Accuracy is ± 1% of FS when following conditions are satisfied. 1) Input is not scaled below 1% of input FS 2) Analog output is not scaled below 3% of output FS ;
Step Response: 0.7 sec for 99.9%
A/D Conversion: Dual slope
Control Output: 2 SPDT Relay
Data Interface: RS232, RS422, RS485
Digital Filter: Programmable
Supply Voltage: 90 to 240 Vac
Impedance Input: 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc
Span Adjustment: 0.001 to 9999 counts, programmable
Number of Inputs: 1
Decimal Selection: 0, 0,001, 0,01, 0,1
Display Type Note: 4-digit, 9-segment LED, 10.2 mm (0.40") i32, i16, i16D, i8DV: 21 mm (0.83") i8: 10.2 mm (0.40") and 21 mm (0.83"), i8DH—GREEN, AMBER, and RED programmable colors for process variable, setpoint and temperatureunits
Offset Adjustment: -1999 to +9999
Data Interface Note: RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status RS485: Addressable from 0 to 199
Input Configuration: Single-ended
Set Point Adjustment: -1999 to 9999 counts
Additional Features 1: Benchtop Enclosure
Common Mode Rejection: 120 dB
Electrical Connection: Sub-D Female Miniature Connector
Normal Mode Rejection: 60 dB
Temperature Stability: 0.04°C/°C
Current Measurement Range: 0 to 20 mA
Electrical Connection Note: DB-9 connector on rear panel; optional alarm 1 and 2 (programmable)
Temperature Measurement Range: RTD (Pt, 0.00385, 100, 500, 1000 Ω) : -200 to 900°C, RTD (Pt, 0.00392, 100, 500, 1000 Ω) : -200 to 850°C
