Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Height: 21 mm
Weight: 31 g
Accuracy: ± 5 µA
Diameter: 43 mm
RTD Type: Pt100
Approvals: BS EN 61326 ; 1998 – Electrical equipment for measurement and control ANNEX A ; ANNEX F
Span, Min: 25°C
Input Type: RTD
Calibration: Pushbutton
Output Load: [(Vsupply-10)/20] kΩ
Sensor Type: Transmitter
Probe Length: 0 mm
Warm Up Time: 1 min to full accuracy
Accuracy Note: (mA output/2000) or 5 uA (whichever is the greater)
Output Detail: 2 wire, 4 to 20 mA current loop Maximum Output: 21.5 mA (in high burnout condition) Minimum Output: 3.8 mA (in low burnout condition)
Response Time: 1 sec
Start Up Time: I out < 4 mA during start up
Humidity Range: 10 to 90% RH non condensing
Input Accuracy: ± 0.1 °C
Setup Controls: Pushbutton, Program LED will flash in bursts
Supply Current: <200 µA
Supply Voltage: 10 to 30 Vdc
Sheath Material: N/A
Thermal Effects: 1 uA/°C, 25 ppm/°C
Update Rate, Max: 500 ms
Electrical Output: 4 to 20 mA
Supply Power Type: DC
Thermocouple Type: N/A
Self Heating Effect: 0.2 uA/V
Input Control Signal: N/A
Lead Resistance, Max: 20 Ω per leg
Electrical Connection: Screw Terminal
Lead resistance effect: 0.002°C/Ω
Programmable Functions: offset, Range, Sensor Burnout Indication
Wiring/Connector Table: 2- or 3-Wire
Temperature Coefficient: 0.00385 Ω/°C
Temperature Input Range: -200 to 850°C
Storage Temperature, Max: 90 °C
Storage Temperature, Min: -50 °C
Operating Temperature, Max: 85 °C
Operating Temperature, Min: -40 °C
