ONMEAS AT51160 DC Low Resistance Tester (160 chs; 1μΩ ~ 200kΩ)

Number of Channels: 160 channels (10×16 parallel scanning measurement)

Measurement Parameters: DC Low Resistance

Basic Accuracy: 0.05%

Measurement Range: 1μΩ to 200kΩ

Signal Source: Maximum Current: 1μA to 1A

Current Mode: Auto

Range: Auto Range, Manual Range, Nominal Range

Measurement Speed: Slow: 3.5s/160 channels; Medium: 1.9s/160 channels; Fast: 1.1s/160 channels

Display Results: Direct Reading Display

Maximum Reading: 22,000

Calibration: Full-range short-circuit zeroing

Comparator: Trigger

Trigger Mode: Internal Trigger, External Trigger

Test Terminals: Four-terminal Test

Contact Check Function: Method: 4-terminal. Display: CC.HL: Both HIGH/LOW contacts poor; CC.H: HIGH contact poor; CC.L: LOW contact poor

Instrument Dimensions: Approx. 485 x 129 x 371 mm (W×H×D)

Net Weight: Approx. 14 kg

Power Requirements: Voltage: 198VAC to 240VAC, Frequency: 50Hz, Power: 20VA

Interface: RS-232C/485 Interface (SCPI Command Set)/MODBUS; LAN Interface

Datasheet