| Model | | | | | | SDS9302 |
| Bandwidth | | | | | | 300MHz |
| Sample rate | | | | | | 3.2GS/s |
| Horizontal Scale(S/div) | | | 1ns/div~100s/div, step by1~2~5 |
| Rise time | | | | ≤1.17ns |
| Display | 8” Colored LCD, 800x600 pixels, 65535 colors |
| Channel | 2 + 1 (External) |
| Record length | Max 10M |
| Input coupling | DC, AC , Ground |
| Input impedance | 1MΩ±2%, in parallel with 10pF±5pF |
| Channels Isolation | 50MHz: 100 : 1, 10MHz: 40 : 1 |
| Max. input voltage | 400V (PK-PK) (DC + AC PK-PK) |
| DC gain accuracy | ±3% |
| DC accuracy | Average﹥16: ±(3% rdg + 0.05 div) for △V |
| Probe attenuation factor | 1X, 10X, 100X, 1000X |
| LF respond(AC, -3dB) | ≥5Hz (at input, AC coupling, -3dB) |
| Sampling rate / relay time accuracy | ±100ppm |
| Interpolation | (sin x)/x |
| Interval(△T) accuracy(full bandwidth) | Single:±(1 interval time+100ppm×reading+0.6ns);Average>16:±(1 interval time +100ppm×reading+0.4ns) |
| Vertical resolution(A/D) | 8 bits resolution (2 Channels simultaneously) |
| vertical sensitivity | 2mV/div~10V/div |
| Trigger type | Edge, Pulse, Video, Slope, Alternate |
| Trigger mode | Auto, Normal, Single |
| Trigger Level | ±6 Divisions from screen center |
| Acquisition modes | Sample, Peak Detect and Average |
| Line/field frequency(Video) | Support standard NTSC, PAL and SECAM broadcast systems |
| Cursor Measurement | △V and △T between cursors |
| Automatic | Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay A→B↑ , Delay A→B↓ , +Width, -Width, +Duty, -Duty |
| Waveform Math | +, -, *, / ,FFT |
| Waveform storage | 15 waveforms |
| Lissajous figure | Bandwidth | Full bandwidth | | | | | |
| Phase difference | ±3 degrees | | | | | |
| Communication interface | USB, USB flash disk storage, Pass/Fail, LAN, VGA / COM (optional) |
| Cymometer | | Available |
| Power supply | | 100V-240V AC, 50/60HZ,CAT Ⅱ |
| Power consunption | < 18W |
| Fuse | | 2A, T class, 250V |