Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Specification
Measuring range: 0.1 ... 1000 m/s² acceleration
Frequency dependent velocity
Monitoring values:
Peak value of vibration acceleration or vibration velocity
RMS value of vibration acceleration or vibration velocity
High pass filter: 0.1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 / 1000 Hz acceleration
2 / 5 / 10 / 20 / 50 Hz velocity
Low pass filter: 0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 kHz acceleration
1 kHz velocity
Relay output:
PhotoMOS relay
SPST
Max. 60 V / 0.5 A (AC/DC)
Open/close programmable
Connection via screw terminals
Teach-in function: Button for measuring the switching threshold
Warning / alarm: Green and red LEDs
Alarm delay / hold time: 0 ... 99 s / 0 ... 9 s
Interfaces:
USB 2.0 full speed for parameterization and measurement
CDC mode / virtual COM port
Micro USB port inside
External USB port: No
Power supply voltage:
5 ... 30 V DC
5 V DC USB
< 100 mA screw terminals
Ingress protection: IP67 rating
Operating temp. range: -40 ... +80 °C / -40 ... +176 °F
Approx. weight: 160 g / 0.36 lb
Approx. dimensions:
50 mm / 1.97" Ø
52 mm / 2.05" height
Mounting:
M8 thread pin
8 mm / ≈ 0.32" length
25 mm / ≈ 0.99" Ø coupling surface
Delivery contents
1 x PCE-VS10 vibration analyzer sensor switch
1 x USB cable
1 x PC-compatible software
1 x user manual
