Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
The Zonotip+ offers additional features in non destructive ultrasonic metal thickness testing. The Zonotip+ unit comes with an additional smaller 2.5 MHz single-element transducer which allows measuring in confined spaces. The measuring range of the thickness gauge on steel is from 0.7 to 300 mm.
The A-Scan mode in Zonotip+ metal thickness gauge allows excluding measurement inaccuracies, caused by e.g. flaws or cracks in the test object. The signal is visualized on the display as an A-Scan, which allows a more in-depth analysis of the reading. The A-Scan mode offers the following measurement options:
Thickness measurements where only one-sided access is possible, such as
The Zonotip Ultrasonic Thickness Gauge complies with the following standards:
|
Instrument |
|
| Operating temperature | -20 °C to 50 °C (-4 °F to 122 °F) |
| Humidity | up to 85% RH with a temperature of 25 °C (77 °F) |
| Battery operation period | 9h |
| Power | built-in LiPol accumulator |
| Operation supply voltage | 3.7 V |
| Dimension |
157 x 70x 23 mm (6.1 x 2.7 x 0.9 inch) |
| Weight | 250 g |
| Display type | TFT |
| Permissible surface roughness | Rz160 / N12 / Ra = 50 µm |
| Minimum curvature radius | 10 mm (0.4 inch) |
| Ultrasonic velocity range | from 1000 to 9999 m/s |
| Data memory | 100 groups each max. 500 measurements |
| Interface type | USB |
| Thickness resolution | < 99.99 mm: 0.01 mm > 100.0 mm: 0.1 mm |
| Transducer | ||
| Type | Dual-element | Single-element (only Zonotip+) |
| Frequency | 4.0 MHz | 2.5 MHz |
| Measurement range (steel) | 0.7 - 300 mm | 0.7 - 300 mm |
| Diameter of ultrasonic element | 16 mm (0.6 inch) | 10 mm (0.4 inch) |
| Connector type | LEMO type 00.250 | LEMO type 00.250 |
| Size | 45 x Ø23 mm (1.8 x Ø0.9 inch) | 24 x Ø16 mm (0.9 x Ø0.6 inch) |
| Weight |
23g | 16 g |
