PW Instruments PW-UD23 Double Column Universal Material Tensile Testing Machine (20 kN,0.005mm)

Capacity: 10N、20N、50N、100N、200N、500N、1KN、2KN、5KN、10KN、20KN (Max load :20KN)

Display: Computer display mode

Force Resolution: 1/500,000

Force Accuracy: ≤±0.3%

Load Range: 0.2% to 100% full scale

Stroke Resolution: 0.005mm

Measuring range of deformation: 2% to 100%

Accuracy Measure of Deformation: ±0.5%

Relative Error of speed: ≤±1%

Control Mode: All computerized operation mode

Test Stroke : 800mm

Test Width : 420mm

TestSpeed:0.01 ~ 500mm / min computer settings, with

up and down fast adjustment button of fixture

Force Unit Switch: Kgf, N, Ibf, g, ton, Mpa

Stop Mode: Overload stop, emergency stop button,

specimen damage automatic stop, upper & lower limit set

automatic stop, automatic reset function

Machine Dimension: 88×60×160cm(W×D×H)

Machine Drive: Servo motor drive, synchronous wheel

and precision ball screw drive

Power: 400W

Types of test : Tensile and Compression

Machine Weight: Approx 115kg

Power Supply: 220V 50/60HZ 10A

PRODUCTS DETAILS

This machine can test rubber, plastic, leather, metal, nylon thread, fabric, paper and aviation, packaging, construction, petrochemical, electrical, vehicle…And so on the material tension, compression, bending, shear, bonding, stripping, tearing…And so on test, for quality control, incoming inspection, physical properties test, mechanical research, material development of basic equipment.

Machine Function

The universal testing machine is suitable for bending test of metal, nonmetal and composite materials, three-point bending test meets GB/T1449-2005 and GB/T9341-2008 test methods and standards, four-point bending test meets ASTM D6109-2010 test methods and standards, and can also carry out tensile, compression, shear, tear, peel and other mechanical properties test.It can automatically detect the material’s maximum force value, yield force value, breaking force value, maximum deformation and yield elongation. According to GB, JIS, ASTM, DIN and other standards, the bending strength, bending modulus, tensile strength, yield strength, breaking strength, maximum elongation, yield elongation, breaking elongation, constant elongation stress, constant stress elongation, elastic modulus and other parameters can be calculated automatically.

The measurement and control system is specially designed for microcomputer electronic universal testing machine, microcomputer hydraulic universal testing machine,s and microcomputer press.It can be used for tensile, compression, bending, shearing, tearing and stripping tests.PC and interface board are used to collect, save, process and print test results.The maximum force, yield force, average stripping force, maximum deformation, yield point, elastic modulus and other parameters can be calculated.Curve processing, multi-sensor support, graphical interface, flexible data processing, and MS-Access database support, make the system more robust.