Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

Performance
-Measurement range:
–100 to +20°C dew point
–110 to +20°C dew point
Accuracy: ±2°C dew point
Response time: 5 mins to T95 (dry to wet)
Repeatability: 0.5°C dew point
Calibration: Traceable 7-point calibration certifi cate
-Electrical Specifications
Output signal: 4–20 mA (2-wire connection, current source); User confi gurable over range
Output: Dew point or moisture content for ppmV
Analog output scaled range:
Dew point: –100 to +20°C
Moisture content in gas: 0–3000 ppmV
Non-standard available upon request
Supply voltage: 12 to 28 V DC
Load resistance: Max 250 Ω @ 12 V (500 Ω @ 24 V)
Current consumption: 20 mA max
CE marked: Certified
-Operating Specifications
Operating temperature: -40 to +60°C
Compensated Temperature Range: -20 to +50°C
NOTE: The transmitter accuracy statement is only valid for the temperature range: -20/+50°C
Storage Temperature: -40 to +60°C
Operating pressure: 45 MPa (450 barg) maximum
Overpressure rating: x2 operating pressure 90 MPa (900 barg)
Flow rate: 1 to 5 Nl/min mounted in standard sampling block; 0 to 10m/sec direct insertion
-Mechanical Specifications
Ingress protection:
IP66 in accordance with standard
BS EN 60529:1992,
NEMA 4 in protection accordance with standard
NEMA 250–2003
Hazardous area certificates:
ATEX: II 1 G Ex ia IIC T4 Ga (–20°C to +70°C)
IECEx: Ex ia IIC T4 Ga (–20°C to +70°C)
TC TR: 0Ex ia IIC T4 Ga (–20°C to +70°C)
FM: Class I, Division 1, Groups A B C D, T4
cCSAus: Class I, Division 1, Groups A B C D, T4
Housing material: 316 stainless steel
Dimensions: L=132mm x ø45mm (with connector)
Filter (sensor protection):
Standard: HDPE Guard <10μm
Optional: 316 stainless steel sintered guard <80μm
Process connection and material:
5/8"- 18 UNF
Alternatives: G1/2" BSP or 3/4"- 16 UNF
316 stainless steel
Weight: 150g
Interchangeability: Fully interchangeable transmitter
Electrical connections: Hirschmann GDS series (DIN 4350-C)