SENECA TEST-4 Voltage / Current Simulator Meter

POWER SUPPLY

Batteries: 2 × Ni-MH AA batteries, 2,650 mAh

Battery life: 8 hours (minimum, maximum load), 20 hours (typical)

Power supply: 100–240 VAC with battery charger

Protection degree: IP20

Operating temperature: 0–50 °C (recommended)

Humidity: 30–90%, non-condensing

Dimensions: 140 × 75 × 33 mm

Weight: 250 g

Isolation: Battery powered, intrinsically isolated

Rejection: 50–60 Hz

Frequency: 10 Hz

INPUT / OUTPUT SIGNALS

Voltage measurement / generation: 0–11 V

Current measurement / generation: 0–21 mA

Accuracy: 0.1% for each type of input / output

Resolution: 0.002 mA / 0.001 V

STANDARDS

EN 61000-6-4; EN 61000-6-2; EN 61010-1

CONTROLS

ESC / ON/OFF button: General navigation

SELECT (rotation): Current / voltage adjustment

SELECT (press): Coefficient adjustment (value × 10ᴺ, N = 0, 1, 2, 3)

LANGUAGE

Italian, English, French, German, Spanish

DISPLAY

Contrast: 15 levels

Screensaver: Vertical display scrolling after 7 minutes of inactivity

Restart: Press the ESC / ON/OFF button

FUNCTION MENU

General setup: Function mode selection, signal type, language, contrast, display, and encoder sensitivity.

Signal generator: Selection of voltage / current / passive current generation.

Measurement: Voltage / current measurement.

Current and voltage generation: Ramp mode.

ERROR DISPLAY

Overvoltage: V > 11 V

Undervoltage: V < −0.2 V

Overcurrent: > 21 mA

Undercurrent: < −0.1 mA

Blinking value: Signal generation fault

INTERFACES

Input / Output: 2 mm diameter tips

Power supply: Battery charging connector; battery compartment on the back side, under the rubber cover

Micro-USB port: For future functions.

Datasheet