Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Bandwidth: 50 MHz
Channels: 2
Sample Rate: 1 GS/s
Record Length: 20 K points
Vertical system - Analog channels
Vertical resolution: 8 bits
Input sensitivity range: 1 mV/div to 10 V/div max. in 1-2-5 sequence with probe attenuation set to 1X
DC gain accuracy: ±3.0 % step gain, derated at 0.1 %/°C above 30 °C
Maximum Input Voltage: 300 VRMS, Installation Category II; derate above 4 MHz at 20 dB per decade to 200 MHz
Offset range:
1 mV/div to 50 mV/div: ± 1 V
100 mV/div to 500 mV/div: ± 10 V
1 V/div to 5 V/div : ± 100 V
Bandwidth limit: 20 MHz (Typ)
Input coupling: DC, AC
Input impedance: 1 MΩ ±2 % in parallel with 14 pF ±2 pF
Vertical zoom: Vertically expand or compress a live or stopped waveform
Horizontal system - Analog channels
Timebase accuracy: 20 ppm
Trigger system:
External trigger input: Included on all models
Trigger modes: Auto, Normal, Single Sequence
Trigger Types:
Edge Positive or negative slope on any channel. Coupling includes DC, HF reject, LF reject, and noise reject.
Pulse Width Trigger: on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time.
Runt Trigger: on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Trigger source: CH1, CH2, AUX IN, AC Line
Trigger: Coupling DC, Noise Reject, High Frequency Reject, Low Frequency Reject
Waveform measurements:
Cursors Time, Amplitude, Screen Gating Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, between waveform cursors or full record length.
Display Type: 7-inch TFT Color Display
Display Resolution: 800 horizontal by 480 vertical displayed pixels (WVGA)
Waveform styles: Vectors, Variable persistence, and Infinite persistence.
Input Output Ports
USB 2.0 Host Port Supports USB mass storage devices
USB 2.0 device port Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488
Probe Compensator
Amplitude: 5 V
Frequency: 1 KHz
Power source: 100 to 240 VAC RMS ±10%
Power source frequency: 45 Hz to 65 Hz (100 to 240 V) 360 Hz to 440 Hz (100 to 132 V)
Power consumption: 30 W maximum
Dimensions: 154.95 x 325.12 x 106.68 (Hx W X D)
