Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Current Control
Display Laser Current On: LED
Trim Potentiometers (15 Turn): ILD, IPD Resp. PLD, ILD,LIM
Control Range of Laser Current: 0 to ±3 A (a)
Compliance Voltage: >4 V
Setting Accuracy / Repeatability (Full Scale): ±2% Typical / ±0.1%
Noise (10 Hz to 10 MHz, rms): <25 µA
Drift (30 min, 0 to 10 Hz, Typical): <300 µA
Temperature Coefficient: <50 ppm/°C
Power Control
Control Range Photo Diode Current: 5 µA to 2 mA
Accuracy / Repeatability (Full Scale): ±2% Typical / ±0.1%
Photodiode Reverse Bias Voltage: 0 V or 5 V
Current Limit
Setting Range: 0 to >3 A
Setting Accuracy / Repeatability (Full Scale): ±2% Typical / ±0.1%
Analog Modulation Input
Input Resistance: 10 kΩ
Modulation Coefficient, CC: 600 mA/V ± 5%
Small Signal 3 dB Bandwidth, CC: DC to 20 kHz
Modulation Coefficient, CP: 0.4 mA/V ± 5%
TTL Modulation Input
Rise/ Fall Time: <100 µs
TTL Control Input: LD ON
Measurements and Control Outputs
Analog Measurement Values: ILD, IPD, ILD,LIM
Measurements Outputs: 0 to ±5 V
Measurements Accuracy (Typical, Load > 500 kΩ): ±2%
TTL Control Outputs: LD ON, LIMIT
General Data
Supply Voltage / Current: ±12 to ±15 V / 3.1 A (a)
Operating Temperature: 0 to 40°C
Storage Temperature: -40°C to 70°C (Non-Condensing)
Warm-Up Time for Rated Accuracy: 10 min
Dimensions (W x H x D): 100 mm x 42 mm x 160 mm (Eurocard)
Weight: < 0.7 kg
(a) The total combined current for the ITC133 is limited by the total thermal dissipation loss. Optimized cooling by fan or a larger heat sink allows 3 A LD and 3 A TEC at the same time, provided the power supply provides 6.1 A
All technical data are valid at 23 ± 5 °C and 45 ±15% relative humidity (non-condensing).
