Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
-Measuring Method:
+pH: Glass electrode method;
+DO: Membrane type galvanic cell
-Display: Custom LCD (simultaneous display of dual channel measured data)
-Sensor connection:
+CH1: DO
+CH2: pH、ORP
-Meas. Range:
+pH: 0.00-14.00
+ORP: 0-±2000mV
+Temperature: 0-100.0℃
[If standard membrane is used]
+DO: 0-20.00mg/L
+Saturation rate: 0-200%
+Temperature: 0-50.0℃
[If high concentration membrane is used]
+DO: 0-50.0mg/L
+Saturation rate: 0-500%
+Temperature: 0-50.0℃
-Display Range:
+pH: -2.00-16.00
+ORP: 0-±2200mV
[If standard membrane is used]
+DO: 0-22.00mg/L
+Saturation rate: 0-220%
[If high concentration membrane is used]
+DO: 0-55.0mg/L
+Saturation rate: 0-550%
+Temperature: -5-110.0℃
-Repeatability (Main unit):
+pH: ±0.02pH
+ORP: ±2mV
[If standard membrane is used]
+DO: ±0.03mg/L
+Saturation rate: ±2% [If high concentration membrane is used]
+DO: ±0.2mg/L
+Saturation rate: ±2%
+Temperature: ±0.2℃
-Temperature compensation:
+pH: Auto/Manual
+DO: Auto
+Not applied to ORP
-Calibration:
+pH : Capable of three- point calibration
+DO : Zero/span calibration
-Temperature Calibration: One-point calibration
Correction function (Called by Key Input): (DO) Salinity correction Atmospheric pressure correction
-Data Memory: 1000 data points
-Auto Hold Function: Provided (Stability threshold : Fixed)
-Clock Function: Provided (To be shown while conducting a measurement)
-Interval Memory Function: Provided (Interval: The interval can be specified between 1 sec.-99 min. 59 sec. or 2 sec.-99hr. 59 min.)
-Printing Function: Can connect the external printer EPS-P30 (option)
-RS-232C Interface （non-isolated）:
+Connectable Devices: PC or external printer EPS-P30 (option)
+Communication Specifications: Communication system: Start-stop synchronous method; Baud rate: 19,200 bps;
Character length: 8 bits; Parity: None; Stop bit: 1 bit
-Analog Output （non-isolated）:
+Number of Outputs/Items:
ch1: Number of outputs: 2 Measured value and temperature
ch2: Number of outputs: 2 Measured value and temperature
+Output Specification: pH: ±700mV (pH0-14); ORP: ±1V (0-±2000mV); DO/saturation rate: 0-1V FS (each range); Temperature: 0-1V (0-100℃ )
-Waterproof Construction: IP67 (Enabled if the sensor is connected and if the external I/O portions are masked) (Can be immersed in water for 1m and 30 min.)
-Performance Compensation Temperature: 0-45℃
-Power Source: AA alkaline battery/nickel-hydrogen battery (2 pieces) or special AC adapter (6VA option)
-Power Consumption(If 3 volt battery is used)＊2: Approx. 0.014W
-Battery Life: Approx. 400hours
-Outside Dimensions: Approx. 68 (w) x 35 (h) x 173 (d) mm
-Mass (Including Batteries): Approx. 300g
-Inluding:
+ Main unit
+ DO Sensor: OE-270AA
+ pH Sensor: GST-2729C
+ Standard solution pH 6.86, 100mL
+ Standard solution pH 6.86, 100mL
+ Internal filling solution 50mL
+ Beakers (3 pcs)
+ Hand strap: OTZ00006
+ AA battery (2pcs)
+ Connector protective cap: OTD00001
+ Manual
-Tính năng:
+ Màn hình có 2 kênh, đo đồng thời và hiển thị độ pH/DO
+ Thiết kế tiết kiệm điện; pin có thể sạc lại được
+ Thiết kế chống thấm nước (IP67, ngâm sâu 1m, tối đa 30 phút)
+ Lưu trữ dữ liệu lên đến 1000 dữ điểm
+ PC và máy in ngoài có thể kết nối
Các hạng mục đo lường:
pH, ORP, DO, nhiệt độ
(Các điện cực ORP và được bán riêng)
Ứng dụng: Dùng để độ pH, ORP, DO, nhiệt độ trong phòng thí nghiệm
Datasheet
