Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Capacity
Design capacity: 3.8 liters
Working capacity: 1~3 liters
Hood: Cover flange with o-ring in groove ;
Register inside or outside hood to accurately locate and fix bowl in place ;
Two sight glass viewing ports ; One vacuum connection with ball valve and one vacuum gauge .
One solids charging port(chute) Ø40.
Mix bowl
Dia. 180×h.150 (Mix bowl)
With jacket for water/oil at 90psig and 350F .
Four wheels on bowl bottom .
Two pull handles on bowl side .
No discharge valve on bowl bottom .
Characteristics of mixing movement: Two low-speed mixing blades and one H-speed disperser rotate on their own axis as they travel around the mix bowl interior, in order to fully mix two or more materials together well .
Blade type
Standard supply: Quarter-twist blades / Removable (304 St. St.)
For spare
H.-S. Disperser: Ø50 sheared blades on dispersing shaft (304 St. St.)
Power motor 1 for agitating / scraping and planetary: 0.75kw (e.g. 1.0HP), 380v/3phase/50hz, 1500rpm
Power motor 2 for H.-S. dispersing: 1.1kw (e.g. 1.5HP), 380v/3phase/50hz, 3000rpm
Reducer: Cycloid pin type: BLY0-i=23 (S. Fa.=1.0)
Speed
Self-agitating speed: 0~64rpm (based on 50hz)
Planetary / Scraping speed: 0~52rpm (based on 50hz)
Self-dispersing speed: 0~5700rpm (based on 50hz)
Linear velocity: 0~16m/s (based on 50hz)
Scraper arm: Removable (304 St. St.+ PTFE)
Speed control: By frequency inverter(converter)
a. Sealed planetary gearbox .
b. 304 construction : gearbox exterior , hood , scraper arm.
c. Vacuum construction up to -0.098Mpa , with vacuum separator pot ; Vacuum pump 2X-2.
d. O-rings and seals in VQM or Viton (FPM) .
e. H.-S. Bearings : FAG from Germany or NSK from Japan
Raising and lowering the bowl
By hydraulic lift by oil designed for 0.6~1.9MPa
Double action piston Ø50/32×250, 5MPa , Total 1 (one) pc .
Power pack by power motor
Stroke : appr. 250mm
Temp. show: A flush-mounted product temperature probe is required in the lower sidewall area of the bowl. It include a quick-release plug.
Spare parts kit: O-rings, scraper, lip seals
