Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Test Parameter:
- Primary parameters: L / C / R / Z/ DCR
- Secondary parameters: D / Q / R /θ/ ESR
Equivalent Circuit: Series and Parallel
Ranging Mode: Auto
Measurement Terminals: 3-terminal, 5-terminal
Measuring Speed: 4meas/sec, 1.5meas/sec
DCR Measuring Speed: 3meas/sec
Calibration Function: Open, short
Comparator Function: 1%, 5%, 10%, 20%
Input fuse: 0.1A / 250V
Interface: Mini-USB (virtual serial port)
Test Signal:
Test Frequency: 100Hz,120Hz,1kHz,10kHz,100kHz
Test Level: 0.6Vrms
Output Resistance: 100Ω
Display:
Display: LCD Primary-Secondary dual display, with backlight (TH2822 not available)
Reading: Max. Primary parameters: 40,000 digits, secondary parameters D/Q Minimum resolution: 0.0001
Basic Accuracy: 0.25%
Measuring Range
- L: 0.000μH - 1000.0H
- C: 0.000pF - 20.000mF
- Z/R: 0.0000Ω- 10.000MΩ
- DCR: 0.0000Ω- 20.000MΩ
- ESR: 0.0000Ω- 999.9Ω
- D: 0.0000 - 9.999
- Q: 0.0000 - 9999
- Θ: 0.00°- ±180.0°
Power Requirements:
Battery Model: LH-200H7C,8.4V Ni-MH 200mAH rechargeable battery
AC Power Adapter: Input: 220V/50Hz, Output: 12V-15V (100Ω Load)
Standby Current: Max.11μA
Battery Life: 16 hours (typical), new alkaline battery, with backlight off
Auto Power Off: 5min, 15min, 30min, 60min, OFF available; Factory Default : 5min
Low Voltage Indicator: When battery voltage drops below 6.8V, low voltage indicator turns on.
