Tormach 1500MX CNC Milling Machine (500x350x356mm)

X-Axis Travel : 19.7 in. (500 mm)

Y-Axis Travel : 13.8 in. (350 mm)

Z-Axis Travel : 14 in. (356 mm)

Spindle Nose to Table : 3.7–17.7 in. (96–450 mm)

Continuous Spindle Power : 4 hp (3 kW)

Peak Spindle Power : 6 hp (4.5 kW)

Spindle Speed : 250–10,000 RPM

Spindle Taper : BT30

Thread Machining : Rigid Tapping

Maximum Feed Rate (X/Y) : 1,200 IPM (30.5 m/min)

Maximum Feed Rate (Z) : 600 IPM (15.2 m/min)

Power Requirement : Single-Phase 230 VAC, 50/60 Hz, 30 A breaker

Plug Type : NEMA L6-30P

Air Requirement : 90–120 psi

Table Size : 35 in. × 12.75 in. (0.9 m × 0.3 m)

Typical System Footprint (Including Coolant Tank) : 86 in. × 104 in. × 94 in. (2.2 m × 2.6 m × 2.4 m)

Typical System Weight : 2800 lbs. (1270 kg)

Maximum Weight on Table : 300 lbs. (136 kg)

Testing : Ballbar testing on every machine

Frame : Bonded epoxy granite base and column castings

Ways : Linear rails

Motion System : EtherCAT control system

Factory Assembled Pallet Weight : 3210 lbs. (1456 kg)

Self-Assembled Pallet Weight : 2650 lbs. (1202 kg)

Datasheet