Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Input frequency range: 0.01-30 MHz (direct input section), 30-3000 MHz (heterodyne section), separate SMA inputs, paths internally switchable
Tuning resolution: 1 MHz
Output frequency: 70 MHz
Output bandwidth: 22 MHz
Gain: 30 dB typ.
Noise figure: 15 dB typ.
Internal spurii: less than -100 dBm of eq. antenna input except for 30 MHz reference clock at typ. -70 dBm and its multiples at less than -90 dBm typ.
IF rejection: >40 dB typ.
Image rejection: >40 dB typ.
Maximum input level: +10 dBm
Attenuation control: 0-20 dB in 1 dB steps (30 to 3000 MHz path only)
IP3: -3 dBm @ 1060 MHz with interfering signals at 1040 MHz and 1050 MHz
Input impedance: 50 ohm (SMA connector)
Output impedance: 50 ohm (SMA connector)
Amplitude ripple: 3 dB typ.
Phase ripple: 3 degrees typ.
Phase adjustment range: 60 degrees
Phase adjustment resolution: 0.25 degrees
Channel-to-channel isolation; 40 dB typ.
Total phase noise: -86 dBc/Hz @ 10 kHz offset (30 MHz internal ref.)
Tuning speed: 5 ms typ.
Frequency stability: 1 ppm (or external reference)
External reference: 10 MHz or 30 MHz (-5 dBm to +15 dBm)
LO1: 3950 to 6920 MHz (accessible to the user at 0 dBm +/- 5 dB via SMA LO1 Out)
LO2: 3850 or 3990 MHz (accessible to the user at +5 dBm via SMA LO2 Out)
IF1: 3920 MHz (accessible to the user with 0 dB gain, 30 MHz BW, SMA output)
Phase-coherent capability: Inbuilt two-way splitters on LO1 and LO2 for two-channel phase-coherent operation
HF Mode Preselector: Switchable AM BCB filter
HF Mode Preamplifier: 20 dB switchable
HF Mode Antialiasing Filter: 30 MHz LPF
Power consumption: 6 W typ.
Control interface: USB 2.0 or RS-232C
Dimensions: 91 x 68 x 47 mm (3.6" x 2.7" x 1.9")
Weight: 375 g (13.2 oz)
Operating temperature: -10º to +60º C
Humidity: 20-90% non-condensing
