Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Function introduction
Switch key: This switch is a self-locking switch; press it to turn on the power, the transmitter is in working state; pop up to disconnect the power supply, the transmitter is in a shutdown state.
Output port: This port is a multi-core dedicated aviation socket; it is used to change the output mode of the signal. Connecting the direct connection line is the direct connection mode; inserting the coupling clamp connection is the coupling mode; not connecting the line is the induction mode.
Liquid crystal display area: Display the required basic information.
Frequency key: This key is a jog soft switch; the frequency of the output signal can be changed every time it is pressed; the initial power-on is 577Hz. Initially 8KHz in sensing mode. In the frequency setting menu interface, press this key to select or cancel the frequency covered by the light bar; in the multi-frequency mode setting, press this key to choose to replace the output frequency channel.
Power key: This key is a jog soft switch; the output power can be changed once every time it is pressed, and it can be selected from low-grade, mid-grade, high-grade and full-grade. Flip through the frequency menu; in multi-frequency mode setting, press this key to select the output frequency.
Menu key: This key is a jog soft switch; press this key to cycle into the frequency setting menu, resistance measurement mode, and multi-frequency mode setting.
Charging port: This port is a Φ2.1 charging stand; it is used to connect a special charger to charge the battery.
Transmitter interface display content
Frequency: Display the current output frequency
Power: Display the current output power; it can display low-grade, mid-grade, high-grade and full-grade respectively
Mode: Displays the current working mode; direct connection, coupling, and induction can be displayed separately
Current: Display the current loop current value; the effective display is 0–999mA
Impedance: Display the current loop impedance value; the effective display is 00001–20000Ω
Power: Indicates the current battery power; represented by a battery symbol, all black is full power, and the left is the current power percentage display
Matching tip: When the circle below the picture starts to roll, it means that the transmitter is working normally
Frequency setting: 577Hz, 815Hz, 8kHz, 33kHz, 65kHz, 82kHz, 133kHz, SS low, SS high, multi-frequency mode.
