For full functionality of this site it is necessary to enable JavaScript.

Elcometer A415CFNFTI Industrial Paint & Powder Thickness Gauge (0~1000μm, USB, bluetooth)

Built in probe type: Ferrous / Non-Ferrous (FNF)
Live data output: USB and Bluetooth
Reading rate: 60+ readings per minute
Accuracy1: ±1-3% or ±2.5μm 
Measurement Range: 0-1000μm 
Operating Temperature: -10 to 50°C 
Relative Humidity (RH): 0 to 95% (RH)
Power Supply: 2 x AA Batteries or via USB
Gauge Dimensions: 14.1 x 7.30 x 3.70cm 
Gauge Weight: 156g / 5.5oz (including batteries)
Packing List: Elcometer 415 gauge, 2 x AA batteries, steel & aluminium check pieces, foil set, wrist strap, impact resistant carry case,
screen protector, calibration test certificate, operating instructions, USB cable, ElcoMaster CD

Details

Manual

Datasheet

 

Elcometer 415 Industrial Paint & Powder Thickness Gauge

The new Elcometer 415 Industrial Paint & Powder Thickness Gauge provides simple, fast and accurate coating thickness measurements on smooth and thin industrial paint and powder coatings. 

The new Elcometer 415 automatically switches between ferrous and non-ferrous metals. Designed to measure cured paint and powder coatings up to 1000μm (40mils), the thickness gauge is ideal for the industrial paint & powder market.

With a reading rate of 60+ readings per minute, the new paint and powder thickness gauge allows to inspect more industrial materials in less time.

Compatible with ElcoMaster® software and ElcoMaster® Mobile App, individual paint and powder thickness readings can be transferred via USB or Bluetooth®  to PC or a mobile device for analysis and instant report generation.

Paint & Powder Thickness Reports

 

Key features and benefits of the Elcometer 415 Paint & Powder Thickness Gauge include:

 

  • Incredibly fast (60+ readings per minute), reduces inspection times, increasing productivity
  • Automatically switches between ferrous and non-ferrous substrates1
  • Measures cured paint & powder coatings up to 1000μm (40mils)
  • 1 point and 2 point calibration ensures accuracy on smooth and thin coated substrates
  • Easy to use, ergonomic design provides maximum comfort for continuous use
  • Large easy to read values in microns or mils
  • Auto rotating large colour display provides clear visibility whatever the angle of measurement
  • Scratch, solvent and powder resistant display
  • Rugged and resistant to powder coatings ingress equivalent to IP64
  • Transfer live data via USB or Bluetooth® to ElcoMaster® for instant report generation

 

 

 

Elcometer 415 Industrial Paint & Powder Thickness Gauge

Technical Specification

 

Model B

Model B

Model T

Model T

Part Number

A415CFBI

A415CFNFBI

A415CFTI

A415CFNFTI

Calibration Test Certificate

Built in probe type

Ferrous (F)

Ferrous / Non-Ferrous (FNF)

Ferrous (F)

Ferrous / Non-Ferrous (FNF)

On screen statistics

 

Number of readings, n;

Average (mean), x;

Lowest reading, Lo

Highest reading, Hi

Live data output

USB

USB

Bluetooth® & USB

Bluetooth® & USB

Reading rate

60+ readings per minute

Accuracy1

±1-3% or ±2.5μm (±0.1mil)

Measurement Range

0-1000μm / 0-40mils

Operating Temperature

-10 to 50°C / 14 to 122°F

Relative Humidity (RH)

0 to 95% (RH)

Power Supply

2 x AA Batteries or via USB (rechargeable batteries can also be used)

Gauge Dimensions

14.1 x 7.30 x 3.70cm / 5.55 x 2.87 x 1.46” (h x w x d)

Gauge Weight

156g / 5.5oz (including batteries)

Packing List

Elcometer 415 gauge, 2 x AA batteries, steel & aluminium check pieces*, foil set, wrist strap, impact resistant carry case,

screen protector†, calibration test certificate, operating instructions, USB cable†, ElcoMaster CD† & 2 year warranty extension card

 

1 When subject to a 2-point calibration: ±1% when calibrated close to the required thickness, ±3% across the range.

† Model T
* F models: steel check piece; FNF models: steel & aluminium check pieces

 

 

 

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information