Blog

A paint thickness meter provides measurable readings across vehicle panels. Comparing nearby readings can reveal inconsistencies associated with repainting, filler, rust repair, or collision work.

Quality control for coated concrete starts with a sound, clean, suitably dry substrate and includes checking surface profile, climate, coating thickness, and adhesion.

Reliable pull-off adhesion testing depends on a sound adhesive-to-dolly bond. For the aluminum dollies evaluated, abrasion and removal of loose debris were the most influential preparation steps.

In-situ RH probes measure moisture conditions within a concrete slab. ASTM F2170-based testing includes probe placement, calibration checks, specified drilling depth, a 24-hour equilibration period, and recording in-situ and ambient conditions.

Non-destructive wire coating measurement relies on matching the gauge and calibration to the wire substrate and diameter, then checking coated parts against required thickness limits.

In many real-world operational systems, clearly distinguishing between when to use mechanical gauges and when to employ handheld electronic measuring devices is a critical challenge for maintenance teams

Artificial intelligence is rapidly shifting from theory to operational systems. The continuous emergence of large language models, intelligent robots, and autonomous vehicle technologies has caused a surge in global demand for computing power

Concrete surface profile affects coating and lining adhesion. ICRI CSP Chips provide a visual, qualitative comparison, while ASTM D8271 describes direct quantitative measurement with a digital depth micrometer.

AI development in Vietnam is gradually shifting from simply using existing tools and models toward building self-reliant capabilities suited to the country's data, infrastructure, and domestic needs. Advancing further at the national level requires more than developing a new AI model. It also involves data, computing capacity, human resources, hardware, and the ability to independently verify technology.

Inspecting rooftop solar panels with a thermal imaging camera requires combining thermal images with visual inspection and electrical data before deciding on any corrective action. Hot spots may be associated with photovoltaic cells, bypass diodes, junction boxes, connectors, or wiring. However, shading, dirt, reflections, and irradiance conditions can also produce similar thermal patterns.