Electronics Manufacturing

Torque-controlled assembly tools can help electronics manufacturers apply and document fastening requirements, verify bit selection, enforce sequences, and collect station-level process data.

In many real-world operational systems, clearly distinguishing between when to use mechanical gauges and when to employ handheld electronic measuring devices is a critical challenge for maintenance teams

The proliferation of non-linear loads such as variable frequency drives, rectifiers, induction furnaces, and LED lighting systems is making harmonic pollution a major headache for industrial plants.

A practical guide to selecting a conformal coating thickness measurement approach for printed circuit boards based on substrate construction, available access, and coating requirements.

Zero Span transforms a Spectrum Analyzer from a tool for observing power levels across frequencies into a tool for monitoring power levels over time at a specific frequency.

Một đỉnh bất thường xuất hiện trên màn hình Máy phân tích phổ chưa thể xác định ngay nguồn nhiễu nằm ở đâu. Đỉnh này có thể xuất phát từ nguồn điện, mạch số tốc độ cao, bộ nguồn chuyển mạch, thiết bị vô tuyến hoặc một nguồn phát xạ nằm gần hệ thống.

When testing a radio system, a low-level signal on a Spectrum Analyzer does not necessarily mean that the transmitter is weak. The power level measured at the analyzer input depends on many factors along the entire signal path, including cables, connectors, filters, splitters, amplifiers, antennas, and the transmission environment.

Before contacting the material, a handheld soldering iron mainly heats the soldering tip. Once soldering begins, heat is continuously transferred from the tip to the material. If the heat supply is not sufficient to compensate for heat loss, the temperature at the contact area drops and the processing time increases

In the semiconductor testing and measurement sector—where every nanosecond and microvolt can determine the success or failure of a chip design—choosing the right test equipment has never been simply a matter of comparing specifications on paper.

A 100W soldering iron can deliver more heating power than a 40W model, but that does not necessarily mean it will solder faster in every situation. Soldering speed depends on the amount of heat that needs to be transferred to the workpiece and the tip's ability to maintain its temperature when it comes into contact with a thermal load.