Gigahertz-Optik MD-37-IGA1 (-1 Con.) Modular Detector (BNC connector)

-Spectral Response: InGaAs 800 nm - 1800 nm

-Sensing Area: 0.8 mm²

-Sensing Area Size: 1 mmØ

-Typical Responsivity:

0.85 A/W @ 1350 nm

0.95 A/W @ 1500 nm

-Imax: 1 mA

-Temperature range: 5 - 40°C

-Cable Length: 2m

-Rise time: 3.5 µs

-Plug Type: -1

-Accessories:

MD-37-CUS: MD-37 Detector housing with printed circuit board and cable for custom design set-ups

MD-37Z-H7: Front adapter 7mm long for MD-37 detector. Useful with filters from 0.5 to 1 in diameter

MD-37Z-C8: Front cap for MD-37 detector. 8mm hole.

MD-37Z-C11: Front cap for MD-37 detector. 11mm hole.

MD-37Z-DR11: Front cap for MD-37 detector with 11mm dia. RADIN diffuser

MD-37Z-FCF: Universal front adapter for MD-37 detector with axial hole specified from 1 mm to 25mm. Useful for mounting fiber bundles and other optics.

SRT-M37-50: Front tube for MD-37 detector with 37mm dia. and 50mm length.

SRT-M37-60-L: Lens adapter for MD-37 type detector heads. Powerful 50mm diameter f50 double-convex lens with MgF2 AR coating. M30x1mm male thread interface with aperture insert. Field of view can be specified based on detector active area.

SRT-M37L-1: Front lens with 1° field of view. Needs SRT-M45/37B to couple with MD-37 detector. 0.7 mm diameter hole aperture

SRT-M37L-2: Front lens with 2° field of view. Needs SRT-M45/37B to couple with MD-37detector. 1.4 mm diameter hole aperture

SRT-M37L-5: Front lens with 5° field of view. Needs SRT-M45/37B to couple with MD-37 detector. 3.4 mm diameter hole aperture

SRT-M37L-10: Front lens with 10° field of view. Needs SRT-M45/37B to couple with MD-37 detector. 7 mm diameter hole aperture

SRT-M37Z01: Flexible rubber ambient light shade for use on SRT-M37-L lenses or the SRT-M37-50 tube.