Hioki 3197 Power Quality Analyzer

- Measurement line type: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire

- Voltage range: 600.0 V AC

- Current range: 500.0 mA to 5.000 kA AC (depends on current sensor in use)

- Power ranges: 300.0 W to 9.00 MW (depends on combination of current range and line type)

- Basic accuracy

+Voltage: ±0.3 % rdg. ±0.2 % f.s.
+Current: ±0.3 % rdg. ±0.2 % f.s. + current sensor accuracy
+Active power: ±0.3 % rdg. ±0.2 % f.s. + current sensor accuracy (at power factor=1) - - - Measurement items

+ RMS Voltage and Current (200 ms calculation)

+ Voltage (1/2) RMS: one cycle calculation refreshed every half cycle.

+ Current (1/2) RMS: half-cycle calculation.

+ Frequency

+ Active Power/ Reactive Power/ Apparent Power/ Power Factor/ Displacement Power Factor/ Active or Reactive Energy Consumption

+ Demand (Active or Reactive power)

+ Up to 50th Harmonic Analysis (Time series measurement or recording is not capable)

+ Peak Voltage and Current

+ Total harmonic voltage distortion ratio

+ Voltage Unbalance Factor

+ K Factor (Time series recording is not capable)

+ Total harmonic current distortion ratio (Time series recording is not capable)

- Event Detection

+ Voltage Swells (Rise), Voltage Dips (Drop), Interruptions: RMS value detected using voltage (1/2) measured every half cycle

+ Inrush Current: RMS value detected using current (1/2) every half cycle

+ Transient Overvoltage: 50 Vrms or more detection, 10 to 100 kHz

+ Timer: Detect events at preset intervals

+ Manual: Detect events when keys are pressed

Number of Recordable Events: 50 event waveforms, 20 event voltage fluctuation graphs, 1 inrush current graph, 1000 event counts

Interface USB 2.0 (Communication to the PC)

Display: 4.7-inch color STN LCD

Power supply: AC ADAPTER 9418-15 (100 - 240V, 50/60Hz), BATTERY PACK 9459, Continuous use 6 hours (LCD Back-light auto-OFF 5min.), 23VA max.

Dimensions, mass: 128 mm (5.04 in) W × 246 mm (9.69 in) H × 63 mm (2.48 in) D, 1.2 kg (42.3 oz) (with Battery pack)

Supplied accessories: VOLTAGE CORD L9438-55 ×1 (Black×4), AC ADAPTER 9418-15 ×1, BATTERY PACK 9459 ×1, USB Cable ×1, Input Terminal Labels ×1, Input Cord Labels ×1, CD-R (Applications software) ×1, Strap ×1, Carrying case ×1, Measurement guide ×1, Instruction manual ×1

Option

CLAMP ON SENSOR 5A 9694x3

CLAMP ON SENSOR 100A 9660x3

CLAMP ON SENSOR 500A 9661x3

FLEXIBLE CLAMP ON SENSOR 5000A CT9667x3

CLAMP ON SENSOR 1000A 9669x3