emin

Memmert HCP105 Humidity Chamber (107L)

  • Manufacturer: MEMMERT
    Model: HCP105
    Origin: Germany
    Guarantee: 12 month
    • Request a Quotation Request a Quotation
  • 146,556,062 VND
  •  Call for best price

    Hotline: (+84) 867820758

    Phone+84 (24)62923267

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Manufacturer: Memmert- Germany

Model: HCP105

Origin: Germany

Warrant: 12 months


Volume: approx. 107 liters

Interior dimension: width 560 x height 480 x depth 400 mm

Exterior dimension: width 719 x height 850 x depth 591 mm

Stainless steel shelves: 2

Max. number of grids/shelves: 6

Fully insulated heated stainless steel door

Additional heated inner glass door

Entry port (silicon), 40 mm clear diameter, moisture tight, can be closed by silicone stopper, at the back, centre left

Door-open-recognition, incl. alarm, shuts down fan

Working temperature range: + 70C above ambient temperature up to 90°C

Setting temperature range: 18 – 90 °C

Setting accuracy: 0.10C

Capacitive humidity sensor for measuring and displaying the relative humidity

Active microprocessor control for humidifying 20 – 95 % rh, incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times. Humidity supply with distilled water (from an external tank) by a selfpriming pump; integral bacteria block by generating hotsteam

Setting accuracy: 0.5% rh

Two high-resolution TFT colour displays with touch-sensitive buttons for selection of functions.

Adjustable parameters: temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones

Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error

HeatBALANCE function for application specific adjustment of heat output distribution (balance) between the upper and lower heating groups in an adjustment range between -50 % and +50 %.

AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function

Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)

Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging

Multiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.1 or 2 resp. 3.3 for units with active cooling) and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm and also for all other parameters such as relative humidity

PID microprocessor control with integrated auto-diagnostic system

Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel

Internal data logger with a storage capacity of at least 10 years

German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT

Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function setpointWAIT: the process time does not start until the set temperature is reached

Calibration: three freely selectable values each, temperature and humidity

Interface: Ethernet, USB

Programme stored in case of power failure

Integral fault diagnostics for temperature and humidity control

Alarm: visual and acoustic

6 sides heating: large-area multi-function heating system on four sides with additional door and back heating to avoid condensation

Door: fully insulated stainless steel door with 2-point locking, additional heated inner glass door.

Voltage: 230 V, 50/60 Hz

Electrical load: approx. 1720 W

Ambient temperature: 10 – 30°C

Humidity: max. 70% rh, non-condensing


Accessories:

+ Perforated stainless steel, 2 pcs

+ Work calibration certificate (measuring point chamber centre) at 60°C with 75% rh (Memmert supply)

+ USB storage medium with software and AtmoCONTROL manual

+ 1 water tank

+ Manual


Detail

Datasheet 



Apply your mail to get promotion information