For full functionality of this site it is necessary to enable JavaScript.

OWON HDS2062M-N Handheld Oscilloscope (60Mhz, 1GS/s, 2 channel)

Specifications

Bandwidth: 60MHz

Sample rate(Real time): 1GS/s

Horizontal Scale(S/div): 5ns/div~100s/div, step by 1~2~5

Rise time (at input, typical): ≤5.8ns

Channels: Dual

Display: 3.7 inch color display with TFT panel (640×480 pixels)

Input impedance: 1MΩ±2%in parallel with 15pF±5pF

Probe attenuation factor: 1X,10X,100X,1000X

Max. input voltage: 400V (PK-PK) DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1

Record length: Max.6000 points on each channel

Interpolation: (sin x)/x

Input coupling: DC, AC, GND

Acquisition modes: Sample, Peak Detect and Average

Vertical resolution (A/D): 8 bit (2 channels simultaneously )

Vertical sensitivity: 5mV/div~5V/div(at input)

DC gain accuracy: ±3%

DC accuracy (Average): Average>16:±(5% reading+0.05div) for ΔV

Trigger type: Edge, Video, Alternate

Trigger mode: Auto, Normal, Single

Trigger level: ±6 divisions from screen center

Waveform math: +, -, ×, ÷, FFT

Waveform storage: 4 waveforms

Communication interface: USB

Cymometer: Available

Power supply: 100V-240V AC, 50/60Hz

Multimeter Specification

Full scale reading: Diode

Input Impedance On/Off measurement

Capacitance: 51.2nF-100uF:±(3%±3 digit)

Voltage VDC:400mV,4V, 400V: ±(1±1digit) Max. input: DC 1000V,

VAC:4V,40V,400V:±(1±3digit) Frequency:40Hz-400Hz, Max. input: AC 750V(virtual value)

Current DCA:40mA, 400mA:±(1.5%±1 digit) 10A:±(3%±3digit)

DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 10A:±(3%±3digit)

Impedance: 400Ω:±(1%±3digit), 40Ω

Included Accessories

1 - Probe

1 - Multimeter lead

1 - Adapter

1 - 5V 1 KHz output

1 - Small capacitance module

1 - USB data cable

1 - Users Manual

1 - CD-Rom

1 - Metal case

1 - Probe adjust

Details

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information