For full functionality of this site it is necessary to enable JavaScript.

PINTEK PS-1000 Analog Oscilloscope (100MHz, 2CH)

 100MHz BANDWIDTH. 
 20MHz LIMIT. 
 1mV SENSITIVITY. 
 2.0nS RESOLUTION. 
 CE. TUV GS, UL, CUL, IEC1010

Details

Download datasheet

CRT

Type : Rectangular with integral graticule.
Display Area : 8 x 10 div ( 1 div = 1 cm )
Accelerating Voltage : 14 kV.
Phosphor : P31.

 VERTICAL AMPLIFIERS ( CH 1 and CH 2 )

Sensitivity :

5 mV / div to 5 V / div ( X1 mode ).
1 mV / div to 1 V / div ( X5 mode ).
1-2-5 sequence, 10 step attenuator. 
Vernier control provides fully adjustable 
attenuation between steps.

 Accuracy : ± 3 % ( X1 mode ).
± 5 % ( X5 mode ).
 Input Resistance: 1 MΩ ± 2 %
Input Capacitance: 25 pF ± 10 pF.

Frequency Response:

5 mV to 5 V / div ( CAL ): DC to 25 MHz (-3 dB).
1 mV / div (CAL): 5mV/div~5V/div:  DC~50MHz(-3db)
Rise Time: Approximately 3.5 ns.
Operaing Modes:
CH1: CH 1, single trace.
CH2: CH 2, single trace.
ALT: Dual trace, alternating.
CHOP: dual trace, chopped.
ADD: algebraic sum of CH 1 + CH 2.
Polarity Reversal (Invert): CH 2 only.
Maximum Input Voltae: 400 V dc + ac peak.

Maximum Undistorted Amplitude:

DC-to-120 MHz: 4 divisions.
DC-to-60 MHz: 8 divisions.

HORIZONTAL AMPLIFIER ( Input through channel 1 input )

X-Y mode: switch selectable using X-Y switch.
CH 1: X axis.
CH 2: Y axis.
Sensitivity: 1mV/DIV - 5V/DIV

Accuracy:

Y-Axis: ± 3%.
X-Axis:  ± 6%.
Input Impedance:

1MΩ //25PF

Frequency Response: DC to 1 MHz typical ( -3 dB ).
X-Y Phase Difference: Approximately 3° at 50 kHz.
Maximum Input Voltage: 400V dc+ac pack

SWEEP SYSTEM

Sweep Speed: 20 ns/div to 0.5 s/div in 1-2-5 sequence, 23
steps.Vernier control porvides fully adjustable
sweep time between steps.
Accuracy: ± 3 %.
Sweep Magnification: 10X, ± 10% extend sweep 
speed up tp 2 ns/div.
Holdoff: Continuously adjustable from NORM to 5 times normal.

TRIGGERING

Trigger Modes: AUTO ( free run ) or NORM.
Trigger Source: CH1, CH2, ALT, EXT, LINE.

Maximum External Trigger Voltage:

300 V dc + ac peak.

Trigger Coupling:

AUTO ( AC ): 30 Hz to 120 MHz.
TV-H ( AC ): Used for triggering from horizontal sync pulses.
TV-V ( DC ): Used for triggering from vertical sync pulses.
Trigger Sensitivity:
Internal: 1.0 division.
External: 200 mV.

OTHER SPECIFICATIONS

Calibrating Voltage: 1 kHz ( nominal ) Positive Square Wave, 0.5 V p-p ( ± 3% )
Trace Rotage: Electrical, front panel adjustable.
Power Requirements: 115/230 VAC ± 10%, 50/60Hz,?
approximately 60 W.
Dimensions: 324 x 132 x 398 mm ( 12.8 x 5.2 x 15.6" ).
Weight: Approximately 8.5 kg ( 18.7 1bs ).
C E STANDARD: E.M.C. Regulations-1992 )E.C. Directive 
89/336/EEC)EN 50081-1 Emissions.
EN 50082-1 Immunity.
  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information