Test on 13MHz RFID Tag-RLB Test Method

Test on 13MHz RFID Tag-RLB Test Method Radio Frequency Identification (RFID), a wireless RF identification system, utilizes radio frequency (electromagnetic sensing, microware, etc.) to conduct the transmission, identification and swapping of wireless information.

Radio Frequency Identification (RFID), a wireless RF identification system, utilizes radio frequency (electromagnetic sensing,microware, etc.) to conduct the transmission, identification and swapping of wireless information. A complete RFID includes electronic tag (Tag), reading device (Reader) and main computer (Host). This application uses RLB to test the common 13MHz RFID Tag. This test method can also be applied for production line to rapidly compare the result with Golden Sample.

The Basic Understanding of the Test

The test method of RFID Tag utilizes RLB and RFID Tag fixture. After connecting TG, fixture and RF terminal, normalize the signal and place DUT at the center of fixture to obtain Tag's frequency range.

Illustration of Curve

This test method aims at obtaining the Return Loss data of DUT to find out its main operating frequency. The amplitude difference under TG Normalize line is the real test difference.

Required Equipment

GSP-9330 / GSP-9300B

Option 01: Tracking Generator

RLB-001: 1GHz Return Loss Bridge GKT-003: RLB Kit

GW RFID Tag Fixture

ADP-001 : N(M)-BNC(F) Adapter

Test Procedures

1.Connect TG, RF, RLB-001 and RFID Fixture

2.Activate GSP-9330 TG function

3. Execute TG Normalize

4.Connect DUT (RFID Tag)

5.Use Min.Peak Search to obtain the frequency of the lowest amplitude

Test Result

관련 뉴스

2026년 10월 02일 16시 40분 40초

Eliminating Abnormal Vibrations: The Secret to Extending Machinery Lifespan in Factories

Loosening or wear never happens overnight; it always stems from minor degradations over time. If the maintenance team waits until mechanical noise is emitted or bearings overheat before intervening, the production line already faces the risk of unexpected downtime and massive repair costs.

2026년 10월 02일 16시 08분 19초

Decoding and Resolving Power Quality Issues

Continuous operation pressure in modern manufacturing plants places severe demands on low-voltage power distribution systems. The dense presence of non-linear loads—such as large variable frequency drives (VFDs), electric arc furnaces, and power converters—generates complex distorted currents.

2026년 10월 02일 09시 52분 21초

How Can Precision Torque Control Improve Assembly Quality?

Precision torque control supports assembly quality by matching torque requirements to the joint, verifying tools regularly, and maintaining consistent work practices.

2026년 10월 02일 09시 50분 55초

How Should Bolted Joints Be Tightened Effectively?

Effective bolted-joint tightening depends on calibrated torque control, torque values informed by joint testing, and a tightening sequence that distributes preload evenly. Washer fit, flange fasteners, gasket relaxation, and embedding also affect preload retention.

2026년 10월 02일 09시 47분 34초

Why Are Automotive Torque Calibration Tools Important?

Automotive torque calibration tools help shops check torque-wrench performance where work is done. On-demand testing can support wheel-service process control, reduce reliance on periodic checks, and reinforce correct torque practices.