Test on 13MHz RFID Tag-RLB Test Method

Test on 13MHz RFID Tag-RLB Test Method Radio Frequency Identification (RFID), a wireless RF identification system, utilizes radio frequency (electromagnetic sensing, microware, etc.) to conduct the transmission, identification and swapping of wireless information.

Radio Frequency Identification (RFID), a wireless RF identification system, utilizes radio frequency (electromagnetic sensing,microware, etc.) to conduct the transmission, identification and swapping of wireless information. A complete RFID includes electronic tag (Tag), reading device (Reader) and main computer (Host). This application uses RLB to test the common 13MHz RFID Tag. This test method can also be applied for production line to rapidly compare the result with Golden Sample.

The Basic Understanding of the Test

The test method of RFID Tag utilizes RLB and RFID Tag fixture. After connecting TG, fixture and RF terminal, normalize the signal and place DUT at the center of fixture to obtain Tag's frequency range.

Illustration of Curve

This test method aims at obtaining the Return Loss data of DUT to find out its main operating frequency. The amplitude difference under TG Normalize line is the real test difference.

Required Equipment

GSP-9330 / GSP-9300B

Option 01: Tracking Generator

RLB-001: 1GHz Return Loss Bridge GKT-003: RLB Kit

GW RFID Tag Fixture

ADP-001 : N(M)-BNC(F) Adapter

Test Procedures

1.Connect TG, RF, RLB-001 and RFID Fixture

2.Activate GSP-9330 TG function

3. Execute TG Normalize

4.Connect DUT (RFID Tag)

5.Use Min.Peak Search to obtain the frequency of the lowest amplitude

Test Result

相关新闻

2026年06月15日 15時03分42秒

How do Rockwell, Brinell, and Vickers hardness differ? How to choose the right hardness testing method

Rockwell, Brinell, and Vickers are three of the most common hardness testing methods currently used. Learn about the differences in measurement principles, application ranges, and how to choose the right method for each type of material.

2026年06月15日 14時30分32秒

How do HRC, HRB, and HRA scales differ in hardness testing?

HRC, HRB, and HRA all belong to the Rockwell hardness system but are applied to different material groups. Understanding the differences between HRC, HRB, and HRA helps in selecting the correct testing method, accurately reading specifications, and avoiding unnecessary errors in material quality assessment.

2026年06月13日 08時40分47秒

How to Convert RPM to RCF? Formulas and Easy-to-Understand Examples

A guide to accurately converting RPM to RCF. Learn the difference between RPM and RCF, the calculation formulas, practical examples, and why you shouldn't rely solely on RPM when using a centrifuge

2026年06月12日 14時26分27秒

What is the required TDS level for shrimp ponds?

What is the ideal TDS level for a shrimp tank? Many people spend a lot of time monitoring pH, temperature, and filtration systems but overlook TDS. Only when shrimp grow slowly, their colors fade, they have difficulty molting, or die off sporadically do they start checking their water source and discover that this indicator has long been out of the right range

2026年06月12日 11時43分51秒

Signs that the electrodes in your TDS meter are degraded and need replacing

TDS meters can operate reliably for many years, but the electrodes are the most subject to wear and tear. Each time a measurement is taken, the sensor surface comes into direct contact with water, dissolved minerals, and various other chemical components. This continuous process means the electrode's responsiveness gradually decreases over time.