For full functionality of this site it is necessary to enable JavaScript.

Hanna HI98195/20 Multiparameter pH/ORP/EC/Pressure/ Temperature Waterproof Meter (20 meter cable)

pH Range: 0.00 to 14.00 pH
pH Resolution: 0.01 pH
pH Accuracy: ±0.02 pH
pH Calibration: automatic one, two, or three points with automatic recognition of five standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer
mV Range: ±600.0 mV
mV Resolution: 0.1 mV
mV Accuracy: ±0.5 mV
ORP Range: ±2000.0 mV
ORP Resolution: 0.1 mV
ORP Accuracy: ±1.0 mV
ORP Calibration: automatic at one custom point (relative mV)
EC Range: 0 to 9999 µS/cm; 0.000 to 200.0 mS/cm (absolute EC up to 400.0 mS/cm)
EC Resolution: auto-ranging: 1 µS/cm from 0 to 9999 µS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm; auto-ranging (fixed mS/cm): 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 from 100.0 to 400.0 mS/cm ; manual: 1 µS/cm; 0.001 mS/cm; 0.01
EC Accuracy: ±1% of reading or ±1 µS/cm whichever is greater
EC Calibration: automatic single point, with six standard solutions (84 µS/cm, 1413 µS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
TDS Range: 0 to 9999 ppm (mg/L); 0.000 to 400.0 ppt (g/L) (maximum value depends on TDS factor)
TDS Resolution: manual: 1 ppm (mg/L); 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L); 1 ppt (g/L); auto-ranging: 1 ppm (mg/L) from 0 to 9999 ppm (mg/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L); auto-ranging (fixed ppt):
TDS Accuracy: ±1% of reading or ±1 ppm (mg/L), whichever is greater
TDS Calibration: based on conductivity calibration
Resistivity Range: 0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm
Resistivity Resolution: dependent on resistivity reading
Resistivity Calibration: based on conductivity calibration
Salinity Range: 0.00 to 70.00 PSU
Salinity Resolution: 0.01 PSU
Salinity Accuracy: ±2% of reading or ±0.01 PSU whichever is greater
Salinity Calibration: based on conductivity calibration
Seawater σ Range: 0.0 to 50.0 σt, σ₀, σ₁₅
Seawater σ Resolution: 0.1 σt, σ₀, σ₁₅
Seawater σ Accuracy: ±1 σt, σ₀, σ₁₅
Seawater σ Calibration: based on conductivity calibration
Atmospheric Pressure Range: 450 to 850 mm Hg; 17.72 to 33.46 in Hg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Atmospheric Pressure Resolution: 0.1 mm Hg; 0.01 in Hg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Atmospheric Pressure Accuracy: ±3 mm Hg within ±15°C from the temperature during calibration
Atmospheric Pressure Calibration: automatic at one custom point
Temperature Range: -5.00 to 55.00 °C, 23.00 to 131.00 °F, 268.15 to 328.15 K
Temperature Resolution: 0.01 K, 0.01 °C, 0.01 °F
Temperature Accuracy: ±0.15 °C; ±0.27 °F; ±0.15 K
Temperature Calibration: automatic at one custom point
Temperature Compensation: automatic from -5 to 55 °C (23 to 131 °F)
Logging Memory: 45,000 records (continuous logging or log-on-demand of all parameters)
Logging Interval: one second to three hours
PC Connectivity: USB to PC with HI9298194 Hanna software installed
Battery Type/Life: 1.5V AA batteries (4) / approximately 360 hours of continuous use without backlight (50 hours with backlight)
Environment: 0 to 50°C (32 to 122°F); RH 100% (IP67)
Dimensions: 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”)
Weight: 400 g (14.2 oz.)
Ordering Information: HI98195/20 is supplied with HI7698195 probe with 20 meter cable, HI7698194-0 pH sensor, HI7698194-3 EC sensor, HI 76981952 Probe maintenance kit (O-rings for sensors (5), syringe with grease to lubricate the O-rings), HI9298194 Hanna PC software, HI920015 micro USB cable, 1.5V AA batteries (4), instruction manual, quick start guide, quality certificate, and rugged carrying case with custom thermoformed insert.
 

Details
  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information