PCE PHD-1-KIT1 Multifunction Conductivity Meter

pH Measurement: automatic 10 ... 40 °C / 50 ... 104 °F

Measurement range 0.00 ... 14.00 pH

Resolution 0.01 pH

Accuracy ± 0.02 pH +2 digits

Calibration 2-point calibration (pH4, pH7)

Temperature compensation Automatic with additional temperature sensor (0 ... 60 ºC / 32 ... 140 ºF) or manual (0 ... 100 ºC / 32 ... 212 ºF)

Redox Measurement  

Measurement range 1999 ... 0 ... 1999 mV

Resolution 1 mV

Accuracy ± 0.5 % + 2 digits

Conductivity Measurement  

Measurement range

0 ... 200 μS/cm

0.2 ... 2.0 mS/cm

2 ... 20.0 mS/cm

20 ... 200 mS/cm  

Resolution

0.1 μS/cm

0.001 mS/cm

0.01 mS/cm

0.1 mS/cm

Accuracy ± 2 % of the measurement range + 1 digit

Calibration at 1413 μS/cm

Temperature compensation Automatic (0 ... 60 ºC / 32 ... 140 ºF)

Total dissolved solids (TDS) Measurement  

Measurement range

0 ... 132 ppm

132 ... 1320 ppm

1320 ... 13200 ppm

13200 ... 132000 ppm

Resolution

0.1 ppm

1 ppm

10 ppm

100 ppm

Accuracy ± 2 % of the measurement range + 1 digit

Temperature compensation Automatic (0 ... 60 ºC / 32 ... 140 ºF)

Salt Content Measurement  

Measurement range

0 ... 20 mg/l (in water)

0 ... 100 % (in air)

0 ... 50 °C / 32 ... 122 ºF

Resolution

0.1 mg/l

0.1 %

0.1 °C

Accuracy

± 0.4 mg/l

± 0.7 %

± 0.8 °C

Calibration In the air

Temperature compensation Automatic (0 ... 50 ºC / 32 ... 122 ºF)

Electrode usable in the pH range pH 4 ... pH 10

Temperature Measurement  

Measurement range 0 ... 60 °C/ 32 ... 140 ºF

Resolution 0.1 °C

Accuracy ± 0.8 °C

General Specifications  

Measurement rate adjustable from 1 second to 8 hours 59 minutes 59 seconds

Display LC-Display 52 x 38 mm / 2 x 1.5"

Memory flexible via SD card memory 1 ... 16 GB

Interface RS-232

Software available as accessory (optional)

Power supply 6 x 1.5 V AA batteries / 9 V-power adapter (optional)

Operating conditions 0 ... +50 °C / < 85 % r.H.

Dimensions 177 x 68 x 45 mm / 7.0 in x 2.7 in x 1.8 in

Weight 490 g / 1.1 lbs

Delivery Scope

1 x pH-Meter PCE-PHD-1-KIT1

1 x oxygen probe OXPB-11

1 x pH electrode PCE-PE-03

1 x conductivity electrode PCE-CDPB-03

1 x temperature sensor PCE-TP-07

1 x SD memory card 2 GB

1 x storage solution PCE-SSO-250 (250ml)

1 x calibration solution PCE-PH4-50 (50ml)

1 x calibration solution PCE-PH7-50 (50ml)

1 x electrolyte solution OXEL-03 for oxygen probe (50ml)

1 x conductance solution PCE-CDS-1413-250 (250ml)

6 x batteries

1 x user manual

1 x carrying case (inner foam prepunched)