Electronics Manufacturing

The Faith FT8340 series is a multi-channel battery simulation solution used for testing everything from startup to sleep mode, verifying each state to detect faults.

Superconducting material testing requires controlled high-current output, accurate measurement, and responsive power delivery. This overview explains the test requirements and the stated capabilities of the FaithTech FTG power supply.

Testing solutions for e-bike batteries, BMS evaluation, power controllers, and abnormal operating scenarios.

A multimeter can measure currents in the microampere (µA) range, but the reading captures only a momentary value. When is a DMM sufficient, and when is a specialized current meter required?

Vì đúng mẫu máy chưa chắc đã đúng nhu cầu. Bán một chiếc máy hiện sóng là đưa khách hàng một thiết bị, còn tư vấn đúng chiếc máy để tìm ra căn nguyên vấn đề của họ mới là phần việc thật sự của một người bán hàng kỹ thuật. Có lẽ đó cũng là lý do giúp anh Bảo giữ vị trí Best Sale EMIN Group năm 2025, không chỉ nhờ hiểu khách hàng, mà còn nhờ vốn kiến thức sâu về những sản phẩm Tektronix mà EMIN đang phân phối.

A circuit board may function normally yet still consume significant power in standby mode. Particularly in IoT devices, wireless sensors, battery-operated equipment, or low-power control circuits, a difference of just a few microamperes in sleep current can significantly impact battery life

A Type K temperature probe may gradually become less accurate after prolonged use due to aging, oxidation, and changes in the probe’s thermoelectric characteristics. The higher the temperature and the longer the exposure time, the more noticeable these effects can become.

Mr. Le Van Truong, Head of the Technical Department at EMIN, shares insights into the processes behind a project handover—ranging from site surveys and risk management at the factory to how a technical lead makes on-the-spot decisions and turns every trip into a shared learning experience for the entire department.

Multispectral cameras capture spectral data across multiple wavelengths, whereas standard cameras primarily serve to record visual images.

Color measurement can be performed through visual observation or with the use of measuring instruments. Regardless of the method, it is important to clearly define the sample being evaluated, the viewing or measurement conditions, the comparison criteria, and how the resulting data will be interpreted.