Live Webinar: Speed Up Your Production Test in Industrial 4.0

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible.

Many semiconductor and electronic device tests involve sourcing a voltage and measuring a current as quickly as possible. Overall test time is a function of charge time, measure time, and discharge time, as well as the time to setup and process the test.

When a typical test program executes from a PC controller, it continually communicates back and forth with the test instrumentation. This communication time, whether it is over GPIB, LAN, USB, or some other protocol, is often one of the largest contributors to slower test times. Embedded test scripts minimize this communication time by storing and then executing entire test programs directly from the instrument’s non-volatile memory. All setup, decision-making, and data storage is now done from inside the instrument itself, independent of the PC.

Join us to learn about, what is a SMU and TSP. Experience the speed and power of the Keithley SMU and TSP, helping you in the new world of Industrial 4.0

DATE: 2/9/2020, Wed

TIME: 2:00 PM (GMT+8)

Related News

08/24/2026 15:53:39

Tips for Optimizing Temperature and Chemicals for Spotless Ultrasonic Cleaning Tanks

If you operate a workpiece cleaning system in your workshop or have recently invested in an ultrasonic cleaner, you have likely encountered situations where the machine runs for ten minutes or more, yet stubborn grease and rust remain completely unaffected. Many people mistakenly believe that simply filling the tank with plain water and turning the machine on is enough; in reality, this approach wastes up to 70% of the technology's ultrasonic cleaning power

08/24/2026 15:05:05

Major Investment Opportunity – Special Promotion on the CX-Series Thickness Gauge Line from Dakota NDT

To support and partner closely with its global distribution network, the company has collaborated with EMIN to launch a highly attractive "Stock-Up" promotion program tailored for business partners, distributors, and project clients.

08/24/2026 10:31:22

The Role of Electrical Safety Testers in Electric Vehicle Production

Electrical safety testers are used to test high-voltage circuits and electrical assemblies associated with the drivetrain, battery, and charging systems. These tests help identify insulation defects, problems in protective earth paths, and insufficient dielectric withstand capability before a product moves to the next production stage or is released for shipment.

08/24/2026 10:12:42

Dakota CX – Ultrasonic Thickness Gauges for Measuring Through Coatings up to 2 mm

In non-destructive testing (NDT), ultrasonic thickness gauges allow users to determine material wear and corrosion without dismantling components or cutting samples. Dakota NDT has developed the CX and PCX8-DL series with a focus on fast measurements, simple operation, and a range of functions for on-site thickness inspection.

08/21/2026 11:50:26

Which soldering station is suitable for an electrical cabinet maintenance workshop, and how does it differ from a mobile phone repair soldering station?

While both are classified as soldering stations designed to melt solder, a technician repairing wiring inside an electrical cabinet and one working under a microscope on a mobile phone circuit board require vastly different types of equipment. Check out the article below!